Icom IC-M804 - Connections; D Basic Connections

62
CONNECTIONS AND INSTALLATION
8
8
AT-141
Main unit
SP-24E
(Option)
HF antenna
(for DSC reception)
Ferrite EMI

12 V or 24 V
battery
Ground

Ground

Remote Controller

■ Connections
D Basic connections
CAUTION:
• After connecting an antenna, tuner control cables,




• DO NOT pull on the antenna and control cable

the tuner unit), damage inside the connector, or a

[DC ISOLATE]
Microphone
NOTE:
• When an external speaker is connected,

• Turn OFF [DC ISOLATE] on the Main unit, or



type crystal oscillator, and the oscillator’s heater


if you turn OFF the power by holding down [ ] on
