45
6
DSC OPERATION
D Receiving a Test call
NOTE:
the Transmitted and Received Call Logs.
(p. 46)
When a Test call is received:
• The alarm sounds until you turn it OFF.
• “Received Test Call” is displayed.
1. Push
to turn OFF the alarm.
2.
operation.
: Ignores the call and returns to the
Main screen.
: Puts the RX task on hold and returns
to the Main screen.
: Immediately enters the DSC Task
mode.
Rotate
L
L
functions in the DSC Task mode.
3. Push
, and then
to
return to the Main screen.
TIP: See page 37 for details of the Test
D Receiving a Test Acknowledgment
When a Test Acknowledgment is received:
• The alarm sounds until you turn it OFF.
• “Received Test ACK” is displayed.
1. Push
to turn OFF the alarm.
2. Push
.
Rotate
L
L
functions in the DSC Task mode.
3. Push
, and then
to
return to the Main screen.
■ Receiving DSC calls (other)
To Next Page
Loading...
