Icom IC-M804 - Page 33

28
DSC OPERATION
6
6
1. 
push
Cancel
.
L 
functions in the DSC Task mode.
2. Push
Continue
to send the Distress Cancel call.
• The Distress Cancel call is sent.
L The frequencies that you have to send voice cancel
messages are displayed.
(Example: 2/4/6/8/12/16 MHz)
L To cancel the Distress Cancel call, push
Back
.
3. 
Push
Select FREQ
.
4. Select a frequency to send a voice cancel message.
+
Push
Rotate
L 

cancel message.
5. 
cancellation.
L 

6. Repeat steps 3 to 5 to cancel on all frequencies.
7. After sending a voice cancel message on all
frequencies,
Finish
is displayed.
Push
Finish
.
8. Push
Standby Mode
, and then
OK
to
return to the Main screen.
While waiting for Distress ACK