57
7
■
D
For RT Related:
Set the Inactivity timer to 10 sec, 30 sec, or
z RT Related
[MENU] >
RT Related (J3E/H3E/LSB/J2B/F1B/A1A)
Telephone mode.
D GPS
z Internal GPS
Internal GPS
of your transceiver anywhere in the world.
This setting may not be usable, depending on the
transceiver version or presetting.
• GPS
permanently set to ON.
• GLONASS
Selects whether or not to use the data from the
• SBAS
Turns the Satellite Based Augmentation System
accuracy can be improved.
z External GPS
External GPS
• Baud Rate
Select the data transfer speed to receive data
19200, 38400 bps.
z NMEA Data Output
[
NMEA Data Output
Select whether or not to output the position data
from the NMEA output port.
• On: Outputs the position data from the NMEA
output.
•
D Remote
z Interface
Interface
Set the interface format for the remote connector to
z MOD
MOD
z Baud Rate
Baud Rate
Set the data transfer speed to receive data from
19200, or 38400 bps.
D NMEA2000
NMEA 2000 is a plug-and-play communication standard
used to connect various marine devices and display
transceiver can easily connect to an NMEA 2000
L
z GPS
1.
GPS
• The transceiver starts searching the devices
L
to stop searching devices
and display the list of connected devices.
2.
transceiver, and then push [ENT].
• Device name: The selected device is used.
•
the device that sends a higher
• Not used: No NMEA 2000 device is used.
L
to display the detail of the device.
L
be used will switch to that one. The order of priority is
correction, and unpositioned.
L
information is not saved.
L If the transceiver is connected to both NMEA 0183
and NMEA 2000 devices, the NMEA 2000 devices
only NMEA 0183 devices.
To Next Page
Loading...
