Wash Configuration Tunnel Master
Jr. User Manual—Version 3.0
48 January 2016
CONFIGURE WASH MENU
Before any washes can be processed, the user must configure the wash. There
are many items to be configured including the actual tunnel setup all the way
to setting up services. Each item must be configured accurately if the wash is
to operate properly.
The following
is a list of menu options in the Configure Wash menu and a
brief explanation of their function.
NOTE: This manual will take you through the process of setting up a car
wash. It will do this in the logical order for the setup, which may not
necessarily be the order in which the menu options appear
on the screen.
WASH SETTING DESCRIPTIONS
The Wash Settings menu option is where important information about the
user’s specific car wash equipment is programmed. Important features such
as the anti-theft program and Wet Down option are set in this menu.
Table 8: Configure Wash Menu
Item Menu Option Function
1 Services In the Services menu option the user will define the various services and
wash options they will have at their car wash.
2 Outputs This option is where the user will setup what each output is operating
and the various settings for that output.
3 Outputs List This option allows the user to assign what selective outputs will be
activated for which services that are available to sell.
4 Wash Settings Wash Settings allows the user to set the various equipment settings that
directly relate to their particular equipment. This is where the user will
set many of the unique feature of the Tunnel Master
Jr. tunnel
controller.
5 Set Date Time This option allows the user to set the date and time the system will
recognize.
6 Set Password This option allows you to setup a password to restrict access to the
menus on the relay box.
To Next Page
Loading...
Need help?
General