User Manual—Version 3.0 Tunnel Master
Jr. Optional Report/Receipt Printer Installation
January 2016 85
CHAPTER 7:
OPTIONAL REPORT/RECEIPT PRINTER
INSTALLATION
The Epson TM-T811 thermal printer is utilized by the Tunnel Master
Jr. System
for both the report and receipt printer. These printers can be purchased as an
option to the base system or purchased and added to the system
after initial installation.
Please refer to the Operator’s Manual supplied with the printer for proper
care and maintenance of
your printer.
If you are using the Epson Dot Matrix printer, please be sure to check the DIP
switch settings of the printer. DSW1 DIP switch 3 should be the only DIP
switch set to ON all of the others should be off. The DIP switches are
located
on the bottom of the printer. You will have to remove the small door
covering the DIP switches.
To Next Page
Loading...
Need help?
General