User Manual—Version 3.0 Tunnel Master
Jr. Entrance Keypad
January 2016 71
VIEW SERVICE COUNTS
There will be times during the course of daily operations that management
personnel will want to review sales counts. From the View Counts menu, this
option allows the user to quickly determine how many of each service option
have been processed during the current shift.
If the
user did not purchase the optional report printer, the Viewing Counts
menu option will be the only way they can track sales during a shift.
Once the shift is either manually closed or automatically bumped by the
system, the counts will be cleared back to
zero to start the new shift. For this
reason, if the user wishes to verify a register report to the controller counts
these numbers must be written down at the end of each shift before the shift
is closed.
Follow these steps to view the service counts for
the current shift.
NOTE: To clear a button selected in error, simply press the button again, and
the LED light will go out.
Table 20: View Service Counts Instructions
Step Action Screen Display
1 From the Main Screen display, access the Main
Menu by pressing the Menu button.
Note: If a password has been set, it will be
necessary to enter the password before the
main menu can be accessed.
[1] Shift Break [4] View Counts
[2] Wet Down Wash[5] Print Reports
[3] Configure Wash
2 Press the numeric 3 key to select
View Counts.
Unloaded = Vehicles washed without a service
being programmed.
Cars = # of cars washed Violations = Number of
times maximum car
length exceeded.
00 – UNLOADED 0000 CARS WASHED: 135
VIOLATIONS:
0
Press [ENT] to Continue, [MENU] to Exit
To Next Page
Loading...
Need help?
General