User Manual—Version 3.0 Tunnel Master
Jr. Entrance Keypad
January 2016 73
Bump a Shift or Manually Close Current Shift
Follow these steps to manually break (close) the current shift.
Table 21: Manually Close or Bump the Current Shift Instructions
Step Action Screen Displays
1 Access the Main Menu by pressing the “Menu”
button on the display pad.
NOTE: If a password has been set it will be
necessary to enter the password before the main
menu can be accessed.
[1] Shift Break[4] View Counts
[2] Wet Down Wash[5] Print Reports
[3] Configure Wash
2 Press the numeric key 1 to select Shift Break.
NOTE: A shift report will print automatically at this
point if there is an optional report printer
attached.
Shift Break
Bump Shift (Y/N)?
3 Using the numeric keypad press either Y for yes,
or N for no to close the shift at this time.
Shift Break
Bump Shift (Y/N)? N
4 Press the ENT button on the display pad to enter
selection and return to the Main Menu.
[1] Shift Break[4] View Counts
[2] Wet Down Wash[5] Print Reports
[3] Configure Wash
To Next Page
Loading...
Need help?
General