Part 1 - Getting Started
30
Edit Group
Edit Group lets you customize split screen pages in both
Live and Search modes.
1
While displaying a split screen page, select the Edit
Group option from the context menu. A yellow
border is drawn around the page. Use the arrow
buttons on the remote control or the mouse to
select a dierent page.
2
Press a Camera button or select a camera after
pressing the Menu button. Selected camera is then
loaded on to the selected page. Repeat to assign
other channels to the page.
3
Press the remote control’s button to exit Edit
Group. Alternatively, press the Menu button and
then select Exit Group Edit to exit.
Edit Group will terminate automatically after 15
seconds of inactivity.
Video Recording
Video recording will only take place if all the connections
are made correctly as per information contained in Part
2 of this operation manual.
For more information on video recording settings, refer
to the Record Setup on page 57.
Panic Recording
Select Live or Search menu’s Panic Recording icon or
press the Panic Recording button on the front panel or
the remote control to commence panic recording on all
registered cameras.
To stop Panic Recording, select the Panic Recording
icon or press the Panic Recording button again. If the
Panic Recording Duration option under Record Setup
> General has been congured, Panic Recording will
automatically terminate after the specied duration
of time has elapsed. For more information, refer to the
Record Setup on page 57.
•
Panic Recording takes place irrespective of any
recording schedule set up by the user.
•
Panic Recording video prole from Record Setup –
General applies to all Panic Recording videos.
Panic Recording will not take place if recording mode
is not set to Recycle and the HDD has reached 100% of
its capacity.
To Next Page
Loading...
