Idis DR-6532P - Camera System; Camera System_Audio Detection

Part 2 - Conguration
64
Disk Partially
Full
Generates an event when a disk
in one of multiple quota groups
reaches the specied capacity.
Disk Bad
Generates an event when the
specied percentage of the disk
becomes damaged. Set to between
10% and 90% in 10% intervals.
Disk
Temperature
Specify the threshold temperature.
Once any disk reaches this threshold,
the system will issue an alert.
Disk
S.M.A.R.T.
Monitors disks that support
S.M.A.R.T. and noties the user if a
disk error is detected.
Fan Error
Noties the user when the fan inside
the system malfunctions.
Storage
Disconnected
Noties the user if the storage
becomes disconnected while in use.
Disk Cong
Change
It will be highlighted when the NVR
reboots after the hard disk drive has
been replaced.
No Storage
Found
It will be highlighted when no hard
disk drive has been connected.
Consecutive
Invalid PW
It will be highlighted when login
fails by entering a wrong password
for consecutive attempts.
RAID BROKEN
It will be highlighted when the
mirroring conguration is broken.
Degrade
It will be highlighted when one of
the HDDs composing mirroring is in
error.
• For system events, only an e-mail notication of
actions can be selected.
• In order to use the Notify(Callback) feature, the
NVR must be registered to the remote program on
the receiving PC's end.
• For mor information on RAID Broken and Degrade,
refer to Mirror Conguration error on 39.
Camera System
A list of events that occur in the camera except for video
analysis.
Camera System_Audio Detection
● No.: Select which cameras to apply Audio Detection
to.
● Sensitivity: Set to between 1 (Low) and 5 (High).
● Activation Time: Specify how long audio detection
has to last in order for it to be considered as an event.
When the audio detection is not detected for the
specied duration of time, it will not be considered as
an event.
● Ignore Condition
– Ignoring Interval: The system does not produce
event log entries or remote notications for audio
detected within a certain period of time after the
audio of the camera channels is detected. Set a