EasyManua.ls Logo

Idis DR-6532P - VA Box_Queue Congestion

Idis DR-6532P
139 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Part 2 - Conguration
84
detected within a certain period of time after the
event was detected.
To use the mask rule violation, the mask rule
violation must be set on that channel.
Actions: Specify which actions to take when an event
occurs.
Record: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
Alarm-Out: Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
Notify: Congure to be notied of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
PTZ: Moves the PTZ camera to a specic preset
position when an event occurs.
Event Monitoring: Selects the cameras to monitor
when an event occurs.
VA Box_Queue Congestion
The camera detects queue congestion and events occur
according to Queue Congestion settings.
Setup : Set congestion level to issue an alert by
detecting a queue in real time.
- Mid Congestion : Set the mid congestion level for
each selection area. You can check the information
analyzed on the basis of exceeding the set value on
remote program.
- High Congestion : Set high congestion level for each
selection area. You can check the information analyzed
on the basis of exceeding the set value on remote
program.
The event occurs only when High Conestion
function is set.
Actions: Specify which actions to take when an event
occurs.
Record: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
Alarm-Out: Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
Notify: Congure to be notied of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
PTZ: Moves the PTZ camera to a specic preset
position when an event occurs.
Event Monitoring: Selects the cameras to monitor
when an event occurs.

Table of Contents

Other manuals for Idis DR-6532P

Related product manuals