IEI Technology AFL3-W19A-AL User Manual

AFL3-W19A-AL Panel PC
Page 107
 If considerable amounts of dust, water, or fluids enter the device, turn off
the power supply immediately, unplug the power cord, and contact the
AFL3-W19A-AL vendor.
 DO NOT:
o Drop the device against a hard surface.
o Strike or exert excessive force onto the LCD panel.
o Touch any of the LCD panels with a sharp object
o In a site where the ambient temperature exceeds the rated temperature
B.1.2 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
AFL3-W19A-AL
may result in permanent damage to the
AFL3-W19A-AL and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFL3-W19A-AL. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the AFL3-W19A-AL is opened and any of the electrical
components are handled, the following anti-static precautions are strictly adhered to.
 Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging any electrical component.
 Self-grounding: Before handling any electrical component, touch any
grounded conducting material. During the time the electrical component is
handled, frequently touch any conducting materials that are connected to the
ground.
 Use an anti-static pad: When configuring or working with an electrical
component, place it on an anti-static pad. This reduces the possibility of ESD
damage.
 Only handle the edges of the electrical component: When handling the
electrical component, hold the electrical component by its edges.

IEI Technology AFL3-W19A-AL Specifications

General

Brand	IEI Technology
Model	AFL3-W19A-AL
Category	Industrial PC
Language	English