Figure 3-20: Securing Panel Mounting Brackets
NOTE:
The panel mounting kit described in this section is an optional item. To
purchase it, please contact an IEI sales representative.
3.9.3 Arm Mounting
The AFL3-W19A-AL is VESA (Video Electronics Standards Association) compliant and
can be mounted on an arm with a 100 mm interface pad. To mount the AFL3-W19A-AL on
an arm, please follow the steps below.
Step 1: The arm is a separately purchased item. Please correctly mount the arm onto
the surface it uses as a base. To do this, refer to the installation documentation
that came with the mounting arm.
To Next Page
Loading...
Need help?
General