4.4.1.2 LCD Control
Use the LCD Control submenu (BIOS Menu 17) to select a display device which will be
activated during POST.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
LCD Control
Primary IGFX Boot Display [Auto]
LVDS Panel Detect [INSTALLED]
Panel Setting
Backlight Control Mode [LED]
Backlight Control Type [PWM]
Backlight Control Voltage Level [3.3V]
Select the Video Device
which will be activated
during POST. This has no
effect if external
graphics present.
Secondary boot display
selection will appear
based on your selection.
VGA modes will be
supported only on
primary display.
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.
BIOS Menu 17: LCD Control
Primary IGFX Boot Display [Auto]
Use the Primary IGFX Boot Display option to select the display device used by the
system when it boots.
Auto
DEFAULT
LVDS
HDMI1
Backlight Control Mode [LED]
Use the Backlight Control Mode option to specify the backlight control mode.
Configuration options are listed below.
To Next Page
Loading...
Need help?
General