IEI Technology AFL3-W19A-AL User Manual

AFL3-W19A-AL Panel PC
Page 17
3.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the
AFL3-W19A-AL
may result in permanent damage to the
AFL3-W19A-AL and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFL3-W19A-AL. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the AFL3-W19A-AL is accessed internally, or any other
electrical component is handled, the following anti-static precautions are strictly adhered
to.
 Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
 Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
 Use an anti-static pad: When configuring the AFL3-W19A-AL, place it on an
anti-static pad. This reduces the possibility of ESD damaging the
AFL3-W19A-AL.
 Only handle the edges of the PCB: When handling the PCB, hold the PCB
by the edges.
3.2 Installation Precautions
When installing the flat bezel panel PC, please follow the precautions listed below:
 Power Turned Off: When installing the flat bezel panel PC, make sure the
power is off. Failing to turn off the power may cause severe injury to the body
and/or damage to the system.
 Certified Engineers: Only certified engineers should install and modify
onboard functionalities.

IEI Technology AFL3-W19A-AL Specifications

General

Brand	IEI Technology
Model	AFL3-W19A-AL
Category	Industrial PC
Language	English