Quiet Boot [Enabled]
Use the Quiet Boot BIOS option to select the screen display when the system boots.
Disabled
Normal POST messages displayed
Enabled DEFAULT
OEM Logo displayed instead of POST messages
Launch PXE OpROM [Disabled]
Use the Launch PXE OpROM option to enable or disable boot option for legacy network
devices.
Disabled DEFAULT
Ignore all PXE Option ROMs
Enabled
Load PXE Option ROMs.
Option ROM Messages [Force BIOS]
Use the Option ROM Messages option to set the Option ROM display mode.
Force
BIOS
DEFAULT
Sets display mode to force BIOS.
Keep
Current
Sets display mode to current.
UEFI Boot [Disabled]
Use the UEFI Boot option to enable or disable to boot from the UEFI devices.
Enabled
Boot from UEFI devices is enabled.
Disabled DEFAULT
Boot from UEFI devices is disabled.
Boot Option Priority
Use the Boot Option Priority function to set the system boot sequence from the available
devices. The drive sequence also depends on the boot sequence in the individual device
section.
To Next Page
Loading...
Need help?
General