121
Configure System Settings
AccessPRO
Prerequisites:
§
AccessPRO hardware installed
§
AccessPRO devices connected with IBOS.
Where
§
Main Menu\Tools\System Settings\AccessPRO
AccessPRO
PayCon server is the server component that controls and handles all the traffic to and from the Terminals.
Anti-passback enabled
The Anti-passback function will lock out a pass that has just been read for use in that direction trough the gate again, the
pass must first be used in the other direction. This will prevent a user to give his/her pass to a friend without a legal pass
on the other side of the gate for illegal access.
Dashboard enabled
Enable the dashboard function. This means the dashboard utility that shows the user photo (for 4 gates at the same time)
and if access has been granted or not and a workstation.
Dashboard IP address
The IP address of the workstation running the dashboard utility.
Dashboard TCP port
The TCP port of the workstation running the dashboard utility.
Exit always possible
Whatever the rules say, the 'Outside world' zone can always be entered, in other words it's always possible to exit the
building in case of an emergency.
To Next Page
Loading...