232 - Inepro Back Office Suite
Appendices
Appendix A
Discount Order List
This table is only needed if you want to want to exclude one object (a user, device, group, etc.) from the discounts
that effect them! This is done by placing a stop in the Discount row. But the way in which, the discounts that are in effect for
that group, are ordered must be known.
This is the order in which the Discount row is ordered. For each Discount a number of fields in the Discount dialog is used.
Each combination of fields has a different order number. Product Group and Product cannot be combined. Also Continuous
Period and Happy Hour cannot be combined. Those combination are listed as 'Not Possible' in the last column.
1. Look for the combination that is used and note the order number.
2. Do this for each Discount that effects the group.
3. Order the found Discount by order number.
4. Determine the Discount to place the stop.
5. Open Discount screen in the manager and place the stop.
6. All Discounts with a lower order number will not have an effect.
7. Save the Discount.
Read more about Discounts in the chapter:
Discounts on page
122
To Next Page