202 - Inepro Back Office Suite
USB Stick Procedure
USB Sticks Procedure
Prerequisites:
§
Existing server
Where
§
Main Menu\Tools\Read out USB Sticks
When terminals are used in the system, that use an USB stick in stead of a network solution to transfer the transactions,
those transactions need to be copied to the database by USB stick. This can be done in both the PayCon server service, as
in the Inepro Back Office Manager.
Receive data from the terminal
1. Plug in the USB stick that has been prepared for use in a Terminal.
2. Wait until the data has been copied.
3. Remove the USB Stick.
Load data onto the server
4. Go to the Inepro Back Office Suite system.
5. Click the option 'Read USB Stick' in the Tool menu.
6. Wait until the data has been copied.
7. Use the 'Safely remove the USB stick' option in Windows.
8. Unplug the USB stick.
Load confirmation on the terminal
9. Go Back to the terminal.
10.Plug in the USB stick that has been prepared for use in a Terminal.
11.Wait until the data has been copied.
12.Remove the USB Stick.
It is important to follow this complete routine, so start with the Terminal and end with the terminal. In this way both the
server and the terminal will be updated to the latest status.
It also important to use one USB stick per Terminal.
To Next Page
Loading...