Up/Down Controller User Info/Support Blood Glucose Records
Using the OmniPod
5
51
At the end of the suspend time, a pod Advisory alarm occurs
(Figure 5-20).
To resume your programmed basal rate, press OK.
■ Resume Insulin Delivery
1. On the Home screen, use the Up/Down Controller button
to choose Resume (Figure 5-21); then press Select.
2. Press Confirm to restart the basal program for that time seg-
ment.
■ Avoid Infusion Site Infections
• Always wash your hands and use aseptic technique to pre-
pare the infusion site before applying a pod.
• Do not apply a pod to any area of skin with an active infec-
tion. If you are unsure whether to use a specific site, ask your
healthcare provider.
• At least once a day, use the pod’s viewing window to check
the site for signs of infection and to confirm that the soft can-
nula is securely in place.
• Be aware of the signs of infection, including pain, swelling,
redness, discharge, or heat at the site. If you suspect an infec-
The Advisory alarm repeats every 15 minutes until you
press OK.
Figure 5-20
Figure 5-21
To Next Page
Loading...
