Up/Down Controller User Info/Support Blood Glucose Records
Checking Your Blood Glucose
7
83
The time the test takes depends on your blood glucose level.
The higher your glucose level, the longer it takes to get a
result. When your blood glucose level is in the range of 100 to
150 mg/dL, a result appears in an average of 7 seconds.
4. To mark the result as a pre- or post-meal test, to indicate a
level of exercise, or to indicate other situations connected to
this blood glucose reading:
a. Press Tag.
b. Use the Up/Down Controller button to select the first
tag, then press Select. You can select a second tag for the
reading in the same way.
c. Press Done, then press Next.
5. If you do not want to mark the test, press Next instead of Tag.
6. Remove the test strip.
You can select a maximum of 2 tags for each
blood glucose reading.
If the suggested bolus calculator feature is turned
Off, the Next soft key does not appear. Instead,
press Status or wait for the System to time-out.
To change a tagged result: Press Ta g, select the tag
you’d like to remove, then press Clear.
If the suggested bolus calculator feature is turned Off,
the Next soft key does not appear. Instead, press Sta-
tus or wait for the System to time-out.
• Use only one edge of the strip per test.
• If blood is applied to both edges, you can get
an inaccurate result.
• If you have performed a test using both edges
of the strip, repeat the test using a new strip
and a fresh blood sample.
To Next Page
Loading...
