Intel FALCON 8 Plus

USER MANUAL
INTEL® FALCON™ 8+ UAS
© 2017 Intel Corporation. All rights reserved 148
Selecting
Enter
FalconID
and pushing
ENT opens the
following
screen.
Here you can
connect to
another Intel®
Falcon™ 8+
UAV by enter-
ing the serial
number (ID) of
the respective
UAV (see
above) and
pushing ENT
(OK).
Pushing ESC
brings you
back to the
Main Screen.
Selecting
Format
User SD
and pushing
ENT opens the
following
screen.
This function
allows to for-
mat the User
SD card.
Pushing ENT
confirms the
formatting of
the User SD
card. The pro-
cess starts and
a progress bar
is shown.
Pushing ESC
cancels the
function and
brings you
back to the
Main Screen.
see “INTEL®
FALCON™ 8+
UAV FLIGHT
LOGS” on
page 64 for
further details.
Table 4.1: Status Display Menu Structure (Continued)