iARM rmware upgrade procedures:
1. Click on “Browse” button to select the the iARM rmware le (.tgz) that you wish to upgrade. Click on the “Start Upload”
button to transfer the to update the iARM rmware. Wait until the page is loaded.
1
2
NOTE: When checking the box "Ignore warnings during installation and
force the installation to continue" before performing the upgrade, the warning
messages do not appear during the upgrade.
2. Once update starts, a page will indicate upgrade status. Do not turn off the device power if the rmware upgrade page is
displayed. It should take around 2 minutes to complete the rmware upgrade.
3. Once the upgrade is completed, the system will reboot automatically.
iARM Save & Reboot
No. Item Description
1
iARM
Save & Reboot
Save settings to the ACU and reboot or reboot the system without saving.
1
Save & Reboot Save the modied settings and reboot the system. Click the "Save & Reboot" button.
2
Reboot without
Saving
Reboot the system without saving the modied settings. Click the "Reboot Only" button.
1
2
3
To Next Page
Loading...
Need help?
General
