Intellian GX60 - Library Setting

99
Using Aptus Web
Library Setting
No. Item Description
1
Library Setting Display and set the satellite library information.
2
Library
- Get Library from ACU(BDT): Obtain satellite information installed in the BDT.
- Open Library from PC: open the satellite library le from the
supplied Intellian CD or from the external hard drive/PC. (File format: *.ilf)
- Upload Library to ACU(BDT): upload the satellite library le to BDT.
- Save as Library to PC: save the current library setting to the PC.
3
Load Satellite Select the satellite that you wish to track and press Load Satellite button to load the selected satellite.
4
Selected
Satellite Setting
Displays selected satellite information.
5
Tracking
Satellite
- Satellite name: displays satellite name.
- Longitude: displays satellite orbit position.
- Skew offset: displays Skew offset.
- Tracking method: displays current tracking mode (DVB/NBD)
- RX polarization: displays current RX polarization.
- TX polarization: displays current TX polarization.
6
DVB Information
Displays DVB tracking mode's tracking information.
- Frequency: displays tracking frequency.
- Symbol rate: displays symbol rate.
- NID: displays network ID.
- Verify type: displays verication type (AGC only, DVB lock, DVB decode, DSS decode)
7
NBD Information
Displays NBD tracking mode's tracking information.
- Frequency: displays tracking frequency.
- Bandwidth: displays detection bandwidth.
- Base Local: displays base local frequency.
8
Local Frequency
Setting (MHz)
Displays LNB local frequency (MHz) and voltage.
1
3
4
5
6
7
8
2