32
Antenna Installation
Unpacking Wooden Crate
The antenna pedestal is shipped completely assembled in its radome. The pallet should be lifted by means of a
suitable sized lifting equipment.
Follow the procedures below.
Step 1.
1. Remove the 16 clips from the edge of the wooden crate by using a at-head screwdriver.
2. After removing the xing screw, lift up the top panel.
WARNING: Do not remove the side panel xed with the xing screw rst. Otherwise,
the wooden sticks xed under the top panel may fall and damage the radome inside
the wooden crate.
Inside View
Wooden Crate
Remove Clips
To Next Page
Loading...
