62
Heading
Latitude & longitude
Save
L A T I T UD E LO N G I T UD E
3 7 . 0 0 N 1 2 6. 5 0 E
5. Set the current LATITUDE and LONGITUDE
Touch LEFT and RIGHT arrow keys until the desired character is underscored (selected).
Touch UP and DOWN arrow keys to increase or decrease the value, or touch NUMBER keys to
set the desired value directly.
Touch the OK key to set the parameter.
H E A D I NG
09 0 .0
6. Entry of ship's heading is not required when your system is connected to a NMEA(0813) or
NMEA2000 Heading Gyrocompass output.
Ensure that the supported gyrocompass type is set correctly. If the ship's gyrocompass output
is other than NMEA and Synchro, a purchase of an NMEA converter is required.
SA V E ?
Y E S N O
7. Touch LEFT arrow key to move cursor to YES and touch OK key to save current settings, or
move cursor to NO and touch OK key to abort and return to the main display.
To Next Page
Loading...
Need help?
General
