Chapter 3 — Configuring the Computer
98 CK60 Handheld Computer with Windows Mobile User’s Manual
Configuring the SF51 Cordless Scanner
The following information pertains to configuring the SF51 Cordless
Scanner to work with your CK60. These instructions assume you have
EasySet installed on your desktop or laptop. EasySet is available from the
Intermec Data Capture web site, contact your Intermec representative for
information about this application.
Imager Settings
Depending on what is selected as the scanner model, image settings, decode
security, scanner settings, and virtual wedge are configured from the
Intermec Settings applet. See the Intermec Computer Command Reference
Manual, available from the Intermec web site at www.intermec.com, for
more information about each enabled option.
Enabling Bluetooth
Bluetooth is required for the SF51. On the CK60, use the Bluetooth applet
to enable Bluetooth communications before you configure the SF51.
To enable Bluetooth
1 Select Start > Settings > the Connections tab > the Bluetooth icon.
2 Check Turn on Bluetooth.
3 Click ok to apply this change.
To Next Page
Loading...
