EasyManua.ls Logo

Intermec CK60

Intermec CK60
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 3 — Configuring the Computer
CK60 Handheld Computer with Windows Mobile User’s Manual 83
Using a Storage Card
If you have a Secure Digital storage card for your CK60, this is the best
place for you to installation applications.
1 If you are using a Secure Digital card reader, suspend the CK60, remove
its Secure Digital storage card, and place it in the reader. For help, see
“Using the Secure Digital Card” on page 19.
2 Copy your application file to the Secure Digital card. If you are using
Microsoft ActiveSync to copy the files to the Secure Digital card, place
the application in the “\Storage Card” folder on the CK60.
3 If using a Secure Digital card reader, insert the Secure Digital card back
into the CK60.
4 Navigate to the “\Storage Card” folder and run your application. After
your application is installed, you can run it from the Programs menu.
Using Wavelink Avalanche
You can use the Wavelink Avalanche device management system to install
applications on all of your wireless CK60s.
The wireless CK60 ships with the Avalanche Enabler already loaded on it.
The Avalanche Enabler is configured to activate automatically (typically on
a warm boot).
When the Avalanche Enabler is activated, the CK60 attempts to connect to
the Avalanche Agent. When the CK60 connects to the Agent, the Agent
determines whether an update is available and immediately starts the
software upgrade, file transfer, or configuration update.
To use Avalanche to remotely manage the CK60
1 Use the Avalanche Management Console to install software packages
and updates for the CK60. For help using the console, see the online
help.
2 Schedule the CK60 updates or manually initiate an update using the
Avalanche Management Console.
For information on using Wavelink Avalanche, contact your local Intermec
representative or visit the Wavelink web site at www.wavelink.com.
Note: If you manually activate the Avalanche Enabler on the CK60, you
may be prompted for a password when you exit the Avalanche Enabler. The
default password is leave.

Table of Contents

Other manuals for Intermec CK60

Related product manuals