Intermec CK60 - Scanning with the 2 D Area Imager

Chapter 1 — Using the Computer
CK60 Mobile Computer with Windows Mobile User’s Manual 9
Scanning with the 2D Area Imager
The CK60 has the 2D area imager, which provides the ability to scan 2D
bar code symbologies and supports omni-directional (360°) scanning where
you can position the CK60 in any orientation to scan a bar code label.
Using the 2D area imager is very similar to taking digital pictures.
To scan with the 2D area imager
1 Press the power switch to turn on the CK60.
EV10 Minimum Reading Distances with 0.04" Setbacks
Symbology Bar Code Content Density Minimum Distances Maximum Distances
Code 39 RESO 0.100 MM
R 0.125 MM
0.25
.5
R1MM
0.1mm/ 4 mil
0.125 mm/ 5 mil
0.25 mm/ 10 mil
0.5 mm/ 20 mil
1 mm/ 40 mil
10.82 cm/ 4.26"
9.80 cm/ 3.86"
5.99 cm/ 2.36"
3.96 cm/ 1.56"
7.53 cm/ 2.96"
13.87 cm/ 5.46"
16.92 cm/ 6.66"
23.77 cm/ 9.36"
30.89 cm/ 12.16"
39.78 cm/ 15.66"
UPC/EAN 120010010100 0.33 mm/ 13 mil 4.98 cm/ 1.96" 25.81 cm/ 10.16"
PDF417 10 mil
15 mil
0.254 mm/ 10 mil
0.381 mm/ 15 mil
9.80 cm/ 3.86"
7.77 cm/ 3.06"
16.92 cm/ 6.66"
18.95 cm/ 7.46"