Chapter 3 — Configuring the Computer
CK60 Handheld Computer with Windows Mobile User’s Manual 99
Creating an SF51 Connection Label
To initiate a connection from the SF51, use EasySet to create an SF51
connection label with the CK60 Bluetooth address. The device address is
listed in the Bluetooth applet via the Devices tab on your CK60, like the
following example:
To initiate a connection
1 On your desktop or laptop, double-click the EasySet icon to activate
EasySet if you have not already done so.
2 In the left side, double-click Data transmission settings > Bluetooth
parameters > connect/disconnect > compose BT address.
To Next Page
Loading...
