Chapter 3 — Configuring the Computer
CK60 Handheld Computer with Windows Mobile User’s Manual 101
4 Check Enable scanner port again to reconnect.
To rename these connections to descriptions more suitable for your situation
• Press the stylus on each SF51 Scanner connection for a pop-up menu,
select Rename, enter the new description, then tap ok to save your entry.
When the SF51 is connected, configuration changes take effect
immediately. When the SF51 is not connected, configuration changes take
effect once the SF51 is reconnected.
Using Configuration Parameters
A configuration parameter changes the way the CK60 operates, such as
configuring a parameter to have the CK60 emit a very loud beep in a noisy
environment. Use any of these methods to execute configuration
parameters:
Scan EasySet bar code labels:
You can use EasySet from Intermec Technologies Corporation to print
configuration labels. Scan the labels to change the imager configuration and
data transfer settings. For more information, see the EasySet online help.
Send Reader Commands through the Network or from an Application
You can configure parameters by sending reader commands through the
network or from an application. See the Intermec Computer Command
Reference Manual (P/N 073529) for more information.
To Next Page
Loading...
