Intermec CK60 - Using a Secure Digital Card to Upgrade the Computer; Upgrading both Operating System and PSM Files

Chapter 4 — Maintaining the Computer
CK60 Mobile Computer with Windows Mobile User’s Manual 105
5 Look at the description (or the ReadMe file) to determine if this
download will upgrade both the operating system and PSM files, just the
operating system, or just the PSM. You will need this information later.
6 Close the link and download the .zip file to your desktop or laptop
computer.
7 If you are using a Secure Digital card to upgrade the CK60, see below.
If you are using the SmartSystems Console to upgrade the CK60, see
“Using the SmartSystems Console to Upgrade the Computer” on
page 107.
Using a Secure Digital Card to Upgrade the Computer
To use a Secure Digital card to upgrade the CK60, you need a Secure Digi-
tal card reader and a Secure Digital card formatted as FAT16.
• For both the operating system and PSM files, see “Upgrading Both
Operating System and PSM Files” on page 105.
• For just the operating system, see “Upgrading the Operating System”
on page 106.
• For just the PSM files, see “Upgrading the PSM Files” on page 106.
Upgrading Both Operating System and PSM Files
You may download files that upgrade both the operating system and PSM
files simultaneously. Note that this is a two-step process.
1 Extract the upgrade files to a folder on your desktop or laptop computer.
Be sure to select the option to use folder names when extracting the files.
2 Place all individual root files onto your Secure Digital card, this will
update your operating system only. Ignore the PSM files at that point.
3 Insert the Secure Digital card in the CK60. For help, see “Using the
Secure Digital Card” on page 19.
4 Remove the battery pack from the CK60 and place the CK60 in a dock
connected to external power. For help, see “Changing and Installing the
Battery” on page 12.
5 Using a stylus, press the Reset button inside the battery cavity.
6 When the Installation Complete menu appears, remove the Secure
Digital card, then press the Reset button again.
Note: The CK60 currently supports Delkin Devices Secure Digital cards
only. Intermec cannot guarantee that other Secure Digital cards will work
with the CK60.
Do not use force or a sharp object when pressing the Reset button, or
you may damage this button.