Intermec CK60

Chapter 1 — Using the Computer
22 CK60 Mobile Computer with Windows Mobile User’s Manual
5 Select File > Exit to close the applet.
Using the Status Lights
The status lights on the CK60 turn on to indicate the battery status or a
successful bar code decode. The battery lights and screen icon work to alert
you to your battery status. If the battery light (to the right of the Scan
button) comes on, check the status bar to see what icon appears. The
battery may be critically low and need replacing. The Good Read light
(green) above the display indicates a successfully decoded bar code.
Using the Stylus
Your CK60 has a stylus for selecting items and entering information. Use
the stylus in place of a mouse.
Setting the Vibrate Mode
When you want to set the CK60 to vibrate, you can use any of these
methods: using the Volume applet from the Start screen, using the
Intermec Settings applet, or using the Sounds & Notifications applet.
Setting the CK60 to Vibrate Using the Volume Control
The Volume Control icon is seen in the toolbar at the top of the screen.
Ways to Use the Stylus
Action Description
Tap Touch the screen once with the stylus to select options, close applica-
tions, launch applications, or launch menus from the taskbar.
Drag Hold the stylus on the screen and drag across the screen to select text
and images.
Tap and hold Tap and hold an icon to see a list of actions available for the item. On
the pop-up menu that appears, tap the action to perform.