Chapter 1 — Using the Computer
4 CK60 Mobile Computer with Windows Mobile User’s Manual
Secondary Reset Method
If performing the recommended reset method does not restore system
operation, try using this method. It does not guarantee that cached disk
data is saved, and as such, transactional data may be lost during the reset.
All other data is preserved.
To press the reset button
1 Press the power switch to suspend the CK60, then remove the battery
pack from the back of the CK60.
2 With a stylus, press the reset button in the battery cavity in the back.
3 Press and hold the power switch as you put the battery back in.
Performing a Clean Boot
If performing either reset method fails to restore system operation, you may
have to perform a clean boot. This is a boot method which formats the
object store to clean data and registry information from the CK60 system
and restores them to their factory-default state.
To perform a clean-boot
1 Press the power switch to suspend the CK60.
2 Remove the battery pack from the back of the CK60.
3 With a stylus, press the reset button in the battery cavity in the back.
4 Press and hold the power switch as you put the battery back in the unit.
5 Continue to hold the power switch until a Warning message appears on
the display.
6 Release the power switch, then read the message.
7 To continue with the clean-boot, press the right side button. To cancel
the clean-boot, press the left side button.
Do not use force or a sharp object when pressing the reset button.
You may damage the reset button.
Note: This will erase the memory in the CK60, including all applications
and data files found in the object store (user store). See “Packaging
Applications for the Computer” on page 80 for more information.
Press this reset button with your stylus.
To Next Page
Loading...
