Chapter 4 — Maintaining the Computer
106 CK60 Mobile Computer with Windows Mobile User’s Manual
7 Remove the existing files from the Secure Digital card and place all of the
files from the PSM/IVA folder into your Secure Digital card. The
number of files will vary from version to version.
8 Insert the Secure Digital card in the CK60.
9 Using a stylus, press the Reset button inside the battery cavity, press and
hold the I/O key until the clean boot menu appears, then press Enter to
reflash the PSM/IVA.
The operating system will boot and load files from the Secure Digital
card. The process is complete once the pen calibration screen is visible.
After this, remove the files from the Secure Digital card.
When the CK60 finishes booting, you may use it. You have reset the CK60
to its default configuration. You need to set the date and time and to set its
network communications parameters to reestablish communications with
the other devices in the wireless network.
Upgrading the Operating System
You may download files that upgrade only the operating system.
1 Extract the upgrade files to a Secure Digital card.
2 Remove the battery pack from the CK60 and place the CK60 in a dock
connected to external power. For help, see “Changing and Installing the
Battery” on page 12.
3 Insert the Secure Digital card in the CK60. For help, see “Using the
Secure Digital Card” on page 19.
4 Using a stylus, press the Reset button inside the battery cavity. Do not
use force or a sharp object when pressing the Reset button, or you may
damage this button.
5 When the Installation Complete menu appears, remove the Secure
Digital card, then press the Reset button again.
When the CK60 finishes booting, you may use it. You have reset the CK60
to its default configuration. You need to set the date and time and to set its
network communications parameters to reestablish communications with
the other devices in the wireless network.
Upgrading the PSM Files
You may download files that upgrade only the PSM files.
1 Extract the upgrade files to a Secure Digital card.
2 Using a stylus, press the Reset button inside the battery cavity, press and
hold the power switch until the clean boot menu appears, then press
Enter to reflash the PSM/IVA.
Note: The upgrade will fail if the CK60 is not connected to external
power. For help, see “Accessories for the CK60” on page 26.
To Next Page
Loading...
