Chapter 1 — Using the Computer
26 CK60 Mobile Computer with Windows Mobile User’s Manual
Power Specifications
Operating: Removable, rechargeable LiIon battery pack;
7.2 V, 2400 mAh (17.3 Watt-hours);
battery life is application-dependent;
recharging cycle is 4 hours or less
Backup: Super capacitor supplies 10 minutes bridge
time while replacing the main battery
Electrical Specifications
External Charge Power: 11 to 28 VDC @ 1.5 A max. (18 W max.)
Environment
Operating temperature: -20° to 50°C (-4° to 122°F)
Storage temperature: -30° to 70°C (-22° to 158°F)
Humidity: 5% to 95% noncondensing
Electrostatic Discharge: +8kV Contact Discharge; +15kV Discharge
Rain and Dust Resistance: IP64 compliant
Drop Survival: Multiple 6 ft (1.8 m) drops to steel or concrete
Screen Specifications
Transflective TFT; QVGA Color with touch panel; 240x320 pixels;
9.7 cm (3.8") diagonal active area; 5-level LED backlight control with high
and low settings
Regulatory Approvals
UL and cUL Listed, UL 60950 and UL 1604 and CSA 22.2 No. 157, FCC
Part 15, TUV, CE mark
Accessories for the CK60
You can use these accessories (sold and ordered separately) with the CK60.
To order accessories, contact your local Intermec representative.
AC4 Quad Battery Charger
Use the Quad Battery Charger to charge up to four AB11 Batteries without
having to remove them from the CK60. You can insert up to four CK60s
with batteries installed making it easy to remember to charge your batteries
overnight. The charger also provides power to your CK60s while
communicating via Ethernet.
AD3 Ethernet Multidock
Use the AD3 Ethernet Multidock to hold up to four CK60s with a
batteries installed. The multidock charges the batteries, provides power to
the CK60s, provides one Ethernet connector, and provides a serial port for
each inserted CK60.
To Next Page
Loading...
