Chapter 5 — Network Support
160 CK60 Mobile Computer with Windows Mobile User’s Manual
To enable Microsoft Security
5 Tap Yes or press Esc to clear the alert box, save your settings, then
perform a clean boot on the CK60. See “Resetting Your Computer” on
page 3 for more information.
Loading Certificates
If you choose to use Transport Layer Security (TLS) with WPA or 802.1x
security, you need to have a unique client certificate on the CK60 and a
trusted root certificate authority (CA) certificate. If you choose to use
PEAP, you need to load a root CA certificate. You can use a third-party CA
to issue unique client certificates and a root certificate.
To load certificates
1 Select Start > Settings > the System tab > the Intermec Settings icon.
2 Tap (+) to expand Communications > 802.11 Radio > Security
Choice.
3 Select “Microsoft Security” from the drop-down list.
4 Press Enter.
• If your CA is on your WLAN, select Start > Settings > the System tab >
the Certificates icon > the Root tab to view certificate details.
• To remove a certificate, press and hold a certificate, then select Delete.
To Next Page
Loading...
