Chapter 3 — Configuring the Computer
84 CK60 Handheld Computer with Windows Mobile User’s Manual
Using the SmartSystems Console
To use SmartSystems Console to install an application
1 Download your application file from the Intermec web site and unzip it
on your desktop.
2 From the SmartSystems Console, drag-and-drop the application onto
each CK60 discovered in your network.
For information on using the SmartSystems Console, see its online help.
Launching Your Application Automatically
You can configure the various media used in the Windows Mobile system
with a folder name and can change the media in the registry of the system.
Many of the startup components rely on folder names to locate information
files, applications, or other related data.
The registry keys used by FolderCopy and other startup components to
retrieve the folder names are as follows:
Flash File Store
[HKLM\Drivers\BuiltIn\FlshDrv]
“FolderName”=“Flash File Store”
SD Card (Storage Card)
[HKLM\System\StorageManager\Profiles\SDMemory]
“Folder”=“Storage Card”
Disk On Chip
[HKLM\System\StorageManager\Profiles\TRUEFFS_DOC]
“Folder”=“DiskOnChip”
During normal Windows Mobile system startup, there are Intermec-
specific and non-Intermec components that require an orderly start to
properly function. These non-Intermec components may also need to start
themselves so the Windows Mobile device can function properly. Since
there are possible configurations that come from using one or more
optional built-in peripheral devices, the platform components starting on
the next page are required to manage startup.
You can use the SmartSystems Console to drag-and-drop Intermec applica-
tions onto your CK60s. The CK60 ships with the SmartSystems client
loaded on it. The console is part of SmartSystems Foundation and is avail-
able from the Intermec web site. To download SmartSystems Foundation,
go to www.intermec.com/idl and open the Device Management page.
Note: This describes the system component startup for Intermec provided
components only. It does not describe the bootstrap loader process. It only
describes the component installation process provided by Windows
Mobile. It is assumed that you understand the Microsoft Mobile startup
procedures and are familiar with how Microsoft components start up.
To Next Page
Loading...
