Chapter 1 — Using the Computer
CK60 Mobile Computer with Windows Mobile User’s Manual 3
Learning Software Build Versions
The Persistent Storage Manager (PSM) is an area of storage which is
embedded in a section of the system’s FLASH memory. This storage area is
not erased when a cold-boot is performed. It may, however, erase during the
reflashing process. In addition to storing applications and data files, you
can store a persistent registry to the PSM region.
To learn the PSM build version or operating system version
1 Select Start > Internet Explorer > the following Intermec logo.
2 Note the information beneath the CK60 Version Information title.
3 Tap the Close icon in the top right corner to exit the Internet Explorer.
Resetting Your Computer
You may need to reset your computer if:
• the CK60 completely stops responding.
• an application is locked up and stops responding.
• when you upgrade the firmware, or
• when you reflash the CK60.
Preferred Reset Method
This procedure is the recommended method in recovering the CK60. It
performs a graceful system shutdown and no data is lost in the process.
To recover the CK60
• Press and hold the power switch on the front of the CK60 for about 10
seconds.
To Next Page
Loading...
