Intermec CK60

Chapter 2 — Windows Mobile
58 CK60 Mobile Computer with Windows Mobile User’s Manual
For information on synchronization, see ActiveSync Help on the desktop.
Viewing Contacts
The contact list displays the contact name and the first primary phone
number or e-mail address specified for that contact. Contacts are ordered
by name of contact or company.
To view contacts
• Tap the default letter (home, work, mobile, or e-mail) to the right of the
contact to see additional phone numbers and e-mail addresses.
• Use the up/down controls on your keypad to highlight a contact, then
press the left/right controls on your keypad to change the default
number, displayed as a letter to the right of the contact name. The
default number is highlighted in the contact’s summary, like the sample
below.
• To see more contact information, tap the contact.
• To see a list of available actions for a contact via a pop-up menu, tap and
hold the contact.
• To see a list of contacts employed by a specific company, tap Menu >
View By > Company. Then, tap the desired company name.
To create a contact
•Tap New. Tap the Notes tab to enter notes. When finished, tap ok to
return to the contact list. New contacts are then added to the displayed
category.
To change a contact
• Tap it in the contact list, then tap Menu > Edit. Tap Menu > Undo to
undo any edits. When finished making changes, tap ok to return to the
contact list.
Note: You can change the appearance of the Contacts list by tapping Menu
> Options.
Indicates the default number
Tap to edit the default number