Intermec CK60

Chapter 1 — Using the Computer
24 CK60 Mobile Computer with Windows Mobile User’s Manual
Setting the Vibrate Mode Using Sounds & Notifications
The Sounds & Notifications applet is another place where you can set the
vibrate mode.
To set the vibrate mode
Physical and Environmental Specifications
Use this section to locate technical information about the CK60 and its
available features and options.
Physical Dimensions
Length: 22.2 cm (8.75")
Width: 9.0 cm (3.55")
Height: 5.3/3.6 cm (2.08"/1.4") at top of keypad
Weight: 704 g (24.8 oz)
Hardware
Microprocessor: Intel XScale PXA272
Application Processor: 520 MHz RAM
Memory: 64 or 128 MB
Flash ROM: 64 MB
Persistent Storage: 128 MB, provides onboard non-volatile
storage of applications and data
Removable Storage: SDIO Card Slot, user-accessible
Keypad: 32-key with large numeric keys or
58-key with full alphanumeric keys;
both with LED backlighting
1 Tap Start > Settings > the Personal tab > the Sounds & Notifications
icon.
2 Tap the Notifications tab.
3 Select the event from the Event drop-down list.
4 Check Vibrate.
5 Tap ok to close.