Chapter 5 — Network Support
CK60 Mobile Computer with Windows Mobile User’s Manual 123
3 Tap the device name, then select Connect from the pop-up menu. On
successful device activation, the device icon changes to remove the red
bar from the left connection image.
•Tap the Volume slider bar to adjust the volume of the connected
Bluetooth audio device.
•Tap the Microphone slider bar to adjust the microphone gain of the
connected Bluetooth audio device.
4 If the activated device has a “hands-free” profile, press a button on the
device to establish an audio connection between the CK60 and the
activated device. See the user manual for the Bluetooth device for
information on what button to press.
5 To establish an audio connection from the CK60 to the activated device
with either a “headset” or “hands-free” profile, tap the device name, then
select Connect from the menu. When connection is established, the
“connected/disconnected” status changes to that of a “connected” status.
Red bar cleared from connection image
To Next Page
Loading...
