Chapter 5 — Network Support
152 CK60 Mobile Computer with Windows Mobile User’s Manual
4 Enter the Common Names of trusted servers.
5 Tap ok to return to the Security page.
TLS (EAP-TLS)
EAP-TLS is a protocol that is based on the TLS (Transport Layer Security)
protocol widely used to secure web sites. This requires both the user and
authentication server have certificates for mutual authentication. While
cryptically strong, this requires corporations that deploy this to maintain a
certificate infrastructure for all their users.
Use “TLS” to configure using EAP-TLS as an authentication protocol, pick
“Open,” “WPA,” “WPA2,” or “Network EAP” as an association mode.
To configure using TLS
1 Set 8021x Security as “TLS, then choose any of the following:
•Set Association to “Open.”
•Set Association to “WPA.”
•Set Association to “WPA2” and Encryption to “TKIP” or “AES.”
Note: If these fields are left blank, the client will accept any
authentication server with a valid certificate. For increased security, you
should specify exactly which authentication servers you expect to use.
To Next Page
Loading...
