Intermec EasyCoder 501 E User Manual

Intermec EasyCoder 501 E – Installation & Operation Ed. 1 45
Chapter 5 Media Load
Turn the printhead lift lever to “Print” posi-
tion.
Internal Batch Takeup, cont.
14
15
17
Close the right-hand door but keep the front
door open.
Feed two blank copies by pressing the Print
key.
2x
16
2.
1.
Release the slack absorber (1). Adjust the
green edge guide so the media is guided with a
minimum of play (2).

Intermec EasyCoder 501 E Specifications

General

Brand	Intermec
Model	EasyCoder 501 E
Category	Label Maker
Language	English