Intermec EasyCoder 501 E – Installation & Operation Ed. 192
Chapter 9 Intermec Shell Startup Program
Font Scaling,
cont.
SLANTING:
– –
0
Slanting means that you can create the same effect as in ITALIC
characters. The higher value, the more askew the upright parts of
the characters will come. Slanting increases clockwise. Default
value is 0.
Accept the default value, or type a new value. Then press <Enter>.
ROTATION
– –
0
Rotation means that each character is individually rotated clockwise.
Default value is 0.
Accept the default value, or type a new value. Then press <Enter>.
SAVE? 1:Yes 2:No
_
In this menu, you can choose between scaling and saving the scaled
bitmap font in the printer’s RAM memory, or to do neither.
Type <1> to scale and save the font, or <2> not to save it, then
press <Enter>. If you choose not to scale and save the font, the
next menu will not appear.
When a font is saved, the fi rmware automatically provides it with a
name based on the name of the original outline font and the selected
size and direction. Note that saving a font will erase possible existing
bitmap fonts with the same name.
SCALING FONT
PLEASE WAIT
This menu is shown while the scaling is performed. When the
operation is completed, a label will automatically be produced, where
the assigned name of the generated bitmap font is printed using the
font in question. Then the menu changes automatically:
FREE RAM SPACE
nnnnnn bytes
This menu shows the remaining number of free bytes in the printer's
RAM memory. Press <Enter> to return to the fi rst menu.
To Next Page
Loading...
