Intermec EasyCoder 501 E - Page 94

Intermec EasyCoder 501 E – Installation & Operation Ed. 1 93
Chapter 9 Intermec Shell Startup Program
PRINT:FONTLIST
1:SCALE 2:DELETE
In this menu, you can also choose to delete bitmap fonts stored in
RAM. Press the <2> key.
DELETE:
XXnnnnnn.n
All bitmap fonts in RAM will be presented in a stack of menus.
You can browse through the stack, which is organized in an infi nite
loop, by pressing <F5> repeatedly. Any time, you can exit by
pressing <C>. When the font you want to delete appears, press
<Enter>.
FONT XXnnnnnn.n
DELETED
This menu confi rms that the font has been deleted. Press <Enter>.
FREE RAM SPACE
nnnnnn bytes
This menu shows the remaining number of free bytes in the RAM
memory. Press <Enter> to return to the fi rst menu, where you can
select a new font to be deleted.
DELETE:
YYnnnnnn.n
If you do not intend to delete any more fonts, but want to return to
the main menu press <C>.
Pressing <C> a second time takes you back to Intermec Shell.
On next page, you will fi nd a schematic overview of the scaling
of fonts in Intermec Shell.
Font Scaling,
cont.