Intermec EasyCoder PF4i User Manual

Chapter D — Media Sensitivity Number
EasyCoder PF4i User’s Guide (IPL Version) 123
Determining the MSN for Intermec-Approved Media and
Ribbons
To determine an exact media sensitivity number, obtain the part
number of your media and/or ribbon and call 1-800-755-5505,
press 1 and then 1. The part number may be printed on the
outside of the box carton.
Both the thermal transfer media and ribbon have a sensitivity
number. To determine the MSN, combine the digits. Note that
“combine” does not mean “add”.
Determining the MSN for Other Media and Ribbons
If you are not using Intermec-approved media and ribbon, you
can still achieve good print quality by setting an approximate
media sensitivity number.
If your media is not listed in the table below, but a similar media
is, use the approximate sensitivity level listed in the first column
to achieve acceptable print quality. For example: 800, 700, 100.
If you cannot determine an approximate sensitivity level, start
with the highest setting (800 for thermal transfer and 700 for
direct thermal) and work your way down until you achieve
acceptable print quality. You can also use PrintSet’s Print Quality
Wizard to help achieve acceptable print quality.
Media or Ribbon
Sensitivity
Number
Description
Thermal transfer media 56* The asterisk for the third
digit is reserved to
identify the ribbon’s
sensitivity number.
Thermal transfer ribbon 5*7 The asterisk for the
second digit is reserved to
identify the media’s
sensitivity number.
567 Optimum sensitivity
number.

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g