Intermec EasyCoder PF4i User Manual

Chapter 1 — Introduction
2 EasyCoder PF4i User’s Guide (IPL Version)
Description of EasyCoder PF4i Printer
The EasyCoder PF4i printer is a medium-duty direct thermal/
thermal transfer printer with a printhead resolution of 8 dots/
mm (203 dots/inch) and a maximum print width is 104 mm (4
inches).
The EasyCoder PF4i printer offers a large number of useful
features:
• Flash memory SIMMs for firmware, fonts, bar codes, and
application programs
• Built-in Compact Flash memory card adapter for firmware
upgrading
• Built-in RS-232 interface
• Provision for extra interface boards including wired and
wireless EasyLAN connections
• Keyboard and display with backlight for improved user
interface.s
A large number of factory-installed or field-installable options are
available, so the printer can be configured for a wide range of
applications. See Chapter 7, “Options” on page 67 for more
information.
The EasyCoder PF4i printer described in this manual supports
the Intermec Programming Language (IPL) v2.30 or later. The
EasyCoder PF4i printer that supports Intermec Fingerprint is
described in its own User’s Guide.

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g