InVid Tech Paramont PD Series - Appendix D Communication Port List

Compatible Device List
DVR User Manual
123
www.invidtech.com
Appendix D Communication Port List
Port Protocol(TCP/UDP) Descriptions
80 TCP
Description: HTTP communication port. It is opened by default and used to
access the WEB client.
Authentication: Username and password
Encryption: NO
443 TCP
Description: HTTPs communication port. It is opened by default and used to
access the WEB client.
Authentication: Username and password
Encryption: TLS
554 TCP
Description: RTSP communication port. It is closed by default. After
enabling RTSP function, this port will be opened and used to transfer audio
and video stream.
Authentication: Username and password (Digest)
Encryption: NO
6036 TCP
Description: Private communication port. It is opened by default and used to
transfer audio and video stream.
Authentication: Username and password (Digest)
Encryption: AES
9036 TCP
Description: This port is opened by default which is mainly used to receive
the information sent by the POS terminal or printer. The information will be
overlaid on the image of the IPC you have configured in previewing or
recording mode.
Authentication: NO
Encryption: NO
41952 TCP
Description: This port is opened by default which is mainly used to receive
the request sent by other UPnP devices and communicate with other UPNP
devices.
Authentication: NO
Encryption: NO
41953 TCP
Description: This port is closed by default. After the UPnP function is
enabled, this port is enabled too. It is mainly used to receive the request sent
by other UPnP devices and communicate with other UPNP devices.
Authentication: NO
Encryption: NO
1900 UDP
Description: This port is opened by default which is used to enable, find and
run SSDP. Additionally, it is also used to listen to and receive the multicast
packets from other online UPnP devices.
Authentication: NO
Encryption: NO