InVid Tech Paramont PD Series - Video Loss Settings; Exception Handling Settings

Alarm Management
DVR User Manual
78
www.invidtech.com
9.4.2 Video Loss Settings
① Click StartSettingsAlarmExceptionVideo Loss Settings to go to the interface as
shown below.
② Enable or disable “Record”, “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”,
“Pop-up Video”, “Pop-up Message Box” and “E-mail”. The Video Loss Settings are similar to
that of the sensor alarm (see 9.1 Sensor Alarm for details).
③ Click “Apply” to save the settings.
9.4.3 Exception Handling Settings
① Click StartSettingsAlarmExceptionException Handling Settings to go to the
interface as shown below.
② Enable or disable “Alarm-out”, “Buzzer”, “Pop-up Message Box” and “E-mail”. The
exception handling settings are similar to that of the sensor alarm (see 9.1 Sensor Alarm
for
details).
③ Click “Apply” to save the settings.